12/31/2022 0 Comments Raspberry kodi buffering![]() ![]() The 'A' side of the TXS0108E device can only go to 3.6V max, so don't power that side with 5V or you'll blow it up. Having said that, the reason might be that you aren't using a 'buffer board', you're using a level-translation board. It might help us if you gave a bit more detail of the thing you're having the problem with. The module on the left is is based on the TXS0108E chip and the right is a BSS138 fet based on an adafruit model Message was edited by: sean conway I added pictorials of the buffer/level shifting modules. I assumed a level shifter would not introduce issues but that does not appear to be the case.Ĭan you share any insight into what is causing the issue and possible solution. I was hoping the buffer would provide some isolation for the Pi to enable me to move the display away from the Pi. ![]() ![]() I confess I have limited experience with this communication protocol. I have tried modules with TXS0108E and BSS138 chips and get the same results.Īttached is the pin out for connections. Images are not displayed if I insert a buffer board between the Pi and the display. I can display images on the display connected directly to the Pi. I'm using the LCD screen Katie's hifromkatie used in the project. Inspiration for the project came from Episode 465: Lego Raspberry Pi HQ Camera. The project is to display images on a 1.3 inch display using a Raspberry Pi. Can someone share their insight into why no images are displayed on the LCD display when a buffer/level shifter board is inserted between the Pi and the display? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |